Journal of Navigation and Port Research 2004;28(4):293-297.
Published online June 30, 2004.
Oscillator Design and Fabrication using a Miniatured Hairpin Resonator
Jang-Gu Kim, Sok-Kyun Han, Hyung-Ha Choi
Abstract
In this papers, an S-band oscillator of the low phase noise property using a miniaturized micro-strip hairpin shaped ring resonator is presented. The substrate has a dielectric constant εr=3.5, a thickness h=0.508 mm, and loss tangent tan δ=0.002 A designed and fabricated oscillator shows low phase noise performance of 99.71 ㏈c∕㎐ at 100 ㎑ offset frequency and of output power 19.584 ㏈m at center frequency 2.450 ㎓. This circuit was fabricated with hybrid technique, but can be fully compatible with the MMIC due to its entirely planar structure.
Key Words: Oscillator;Phase noise;Hairpin shaped ring resonator;MMIC


ABOUT
BROWSE ARTICLES
FOR CONTRIBUTORS
Editorial Office
C1-327 Korea Maritime and Ocean University
727 Taejong-ro, Youngdo-gu, Busan 49112, Korea
Tel: +82-51-410-4127    Fax: +82-51-404-5993    E-mail: jkinpr@kmou.ac.kr                

Copyright © 2024 by Korean Institute of Navigation and Port Research.

Developed in M2PI

Close layer
prev next